192.168.29.1 – Router Login Admin Page

What Is 192.168.29.1?

192.168.29.1 is a private IP address used as the local gateway on certain routers and mobile hotspot devices. When you type it into your browser while connected to the right network, you’re not visiting a site on the internet — you’re communicating directly with the hardware or hotspot creating your Wi-Fi. It only works when your device is connected to that specific network, via Wi-Fi or a wired Ethernet cable.

Most people don’t know this, but the 192.168.29.x subnet is a bit unusual in the consumer router world — which is exactly why it tends to cause confusion. Here’s where you’re most likely to encounter it:

• Asus routers and wireless adapters — certain Asus router models and wireless USB adapters use 192.168.29.1 as their default admin gateway, particularly when operating in access point or hotspot mode.
• Xiaomi / Mi routers — some Xiaomi router models sold in Asian markets (and increasingly available in the US through third-party sellers) use this address as their gateway.
• Android phone hotspots — certain Android devices, particularly those running Android 10 and later with specific carrier configurations, create a hotspot network where the gateway defaults to 192.168.29.1 rather than the more common 192.168.43.1.

If you’re seeing this IP as your Default Gateway and wondering why it’s not something more familiar — that’s why.

Default Login Credentials for 192.168.29.1

The sticker on the back or bottom of your device is always the most reliable source for login credentials — especially for Asus routers, which sometimes print a unique password per unit. That said, here are the known defaults for the brands most commonly associated with 192.168.29.1:

A note on Asus specifically: newer Asus routers (those running ASUSWRT firmware from around 2022 onward) walk you through a setup wizard on first login rather than accepting a universal default password. If you see a “Create Admin Password” screen when you first access the panel, that’s normal — go through the wizard. If you’ve been through setup before and are now locked out, the factory reset section below is your path back in.

How to Log In on a PC or Laptop

1. Make sure your computer is connected to the correct network — the one being broadcast by the router or hotspot at 192.168.29.1. Use Wi-Fi or an Ethernet cable plugged into one of the LAN ports.
2. Open any web browser: Chrome, Firefox, Edge, or Safari all work.
3. Click into the address bar at the very top of the browser window — the bar that shows the current URL of the page you’re on. Not the search box on a new tab page.
4. Type http://192.168.29.1 and press Enter.
5. A login page should appear. Enter your username and password.
6. Click Login, Sign In, or Submit.

If the page shows a “connection refused” or “ERR_CONNECTION_TIMED_OUT” error, don’t abandon ship yet. The Troubleshooting section covers the most likely culprits, and the fix is usually faster than you’d expect.

How to Log In on Your Phone

Competitors don’t break this out by device — they just give a generic paragraph. Here’s what actually works on each platform.

iPhone (Safari)

1. Open Settings → Wi-Fi and confirm you’re connected to the right network — the one hosted by the Asus router, Xiaomi router, or Android hotspot at 192.168.29.1. If you’re on cellular data, the page won’t load.
2. Open Safari.
3. Tap the address bar at the top of the screen and clear any existing URL.
4. Type http://192.168.29.1 and tap Go on the keyboard.
5. The login page should load. Enter your credentials and tap the login button.

Android (Chrome)

1. Confirm you’re connected to the right Wi-Fi network via your notification shade or Settings → Wi-Fi. If you’re trying to reach an Android hotspot’s admin page from another phone, make sure that second phone is connected to the hotspot network.
2. Open Chrome or your default browser.
3. Tap the address bar at the top of the screen.
4. Type http://192.168.29.1 and tap Go or the Enter key.
5. The router or hotspot admin page should appear.

Hotspot users — special note: If you’re trying to access an Android phone’s hotspot settings at this address, be aware that not all Android phones expose a web-based admin interface for the hotspot — some only let you configure the hotspot through the phone’s own Settings app. If the page doesn’t load and your default gateway really is 192.168.29.1, check Settings → Hotspot (or Tethering) directly on the Android device instead.

Troubleshooting: 5 Problems and How to Fix Them

Factory Reset Guide

When you’re fully locked out or the device is in a state that can’t be fixed by rebooting, a factory reset returns everything to factory defaults.

Back up first — if you can still get in. On Asus routers, go to Administration → Restore/Save/Upload Setting and download a settings backup file. On Xiaomi routers, look under System → Backup. Also write down any ISP credentials (PPPoE username and password) if applicable — your ISP can resupply these if needed.

What gets erased: Everything you’ve personally configured — your Wi-Fi name (SSID), Wi-Fi password, admin password, port forwarding rules, parental controls, static DHCP leases, guest network settings, and custom DNS. The router returns completely to factory state.

How to physically reset:

1. Confirm the device is powered on.
2. Find the Reset button — on most Asus routers it’s a recessed pinhole on the back or bottom labeled “Reset.” On Xiaomi routers it’s typically on the back panel. Use a straightened paperclip, SIM ejector pin, or toothpick.
3. Press and hold for the appropriate time:
   • Asus routers (ASUSWRT): hold 10 seconds until the power LED begins flashing — on some models like the RT-AX series, hold until the LED turns red or all lights flash
   • Asus wireless adapters (hotspot mode): hold the WPS/Reset button for 10 seconds
   • Xiaomi Mi Router: hold 10 seconds until the system LED flashes orange
   • Xiaomi Mi Router (some models): use the reset pinhole and hold 8–10 seconds
   • Generic / unknown: hold for 20–30 seconds to be safe
4. Release and wait 2–3 minutes for a full reboot.

After the reset, connect to the router’s default Wi-Fi network (check the label for the default SSID — on Asus it’s usually “ASUS” or “ASUS_XX”) and navigate to http://192.168.29.1 to go through setup again.

What to Do After You Log In

Getting past the login screen is just the beginning. Here’s what’s actually worth doing once you’re in.

1. Change Your Admin Password

The default admin/admin is documented in every Asus and Xiaomi manual ever published. Anyone who connects to your Wi-Fi can try it. Change it the moment you get in.

1. On Asus routers: go to Administration → System and find the Router Login Password field.
2. On Xiaomi routers: go to Settings → Administration → Change Password.
3. Enter your current password to verify your identity.
4. Set a new password — at least 12 characters, mixing letters, numbers, and a symbol. Use a password manager so you don’t forget it.
5. Save. You’ll be logged out — sign back in with the new credentials to confirm everything took.

Looking for a baseline on what makes a password actually strong? The NIST password guidelines are the gold standard and well worth a quick read.

2. Change Your Wi-Fi Password

Go to Wireless or Wi-Fi Settings in the menu. Find the Password, Pre-Shared Key, or WPA Key field. Update it to something strong but memorable. Bear in mind that every device on your network will need to reconnect once you save — smart TVs, streaming sticks, game consoles, and smart home devices all need to be updated. I usually make a quick list of everything I know is connected before I hit save.

3. Set Your Security Mode to WPA2 or WPA3

In Wireless Settings, find Security Mode, Authentication Method, or Encryption. Select WPA2-PSK (AES) at minimum. If your router supports WPA3-Personal or WPA2/WPA3 mixed mode — most current Asus models do — use that. Avoid WEP and original WPA entirely; both are well-understood to be broken. The Wi-Fi Alliance WPA3 overview explains what WPA3 actually improves over WPA2 if you want the details.

4. Review Connected Devices

On Asus routers, the Network Map on the main dashboard shows every connected device in a visual layout. You can also go to Clients for a detailed list with MAC addresses, hostnames, and connection type. On Xiaomi routers, look under Status or Connected Devices. Scan through the list. Anything you don’t recognize might be an old device you forgot about — or someone who shouldn’t be there. Most routers let you block devices by MAC address directly from this screen. Understanding what is a MAC address helps make sense of what you’re reading.

5. Set Up a Guest Network

Asus routers have excellent guest network support — look under Guest Network in the main menu. Xiaomi routers typically offer it under Wi-Fi → Guest Network. Enable it with a simple, shareable password. Guests get internet access; they’re isolated from your main network devices entirely. Our guest network is named something embarrassingly obvious, but it works perfectly — simple beats clever every time.

Firmware Updates and Port Forwarding

On Asus routers, go to Administration → Firmware Upgrade. Asus routers can check for updates automatically — it’s worth enabling this under Administration → System if it’s not already on. Xiaomi router firmware is updated through the Mi Router app or directly from the admin panel under System → Firmware Upgrade. Keep firmware current — Asus in particular releases security patches fairly regularly.

For port forwarding (gaming with open NAT, home servers, remote access to security cameras), look under WAN → Port Forwarding on Asus, or Advanced → Port Forwarding on Xiaomi. How port forwarding works is a helpful primer before you start opening ports you don’t need to — every open port is a small increase in attack surface.

Which Brands and ISPs Use 192.168.29.1?

Brands that commonly use 192.168.29.1 as their default admin gateway:

• Asus — the primary brand associated with this IP. Certain Asus wireless router models and wireless USB adapters use 192.168.29.1 as their gateway when in access point or repeater mode, or when using Asus’s router-as-hotspot features. The address also appears on some older Asus RT-series routers depending on firmware version. Most standard Asus home routers default to 192.168.1.1 for their main mode, but the .29.1 address surfaces in specific configurations.
• Xiaomi / Mi — a number of Xiaomi Mi Router models (particularly the compact and travel versions) use 192.168.29.1 as their default gateway. Xiaomi devices are increasingly available in the US through Amazon and third-party retailers.
• Android phone hotspots — certain Android devices with specific carrier firmware versions assign 192.168.29.1 as the gateway IP when sharing a mobile data connection as a Wi-Fi hotspot. If your phone is creating a hotspot and your connected device shows 192.168.29.1 as the gateway, this is normal.

Brands that sometimes use 192.168.29.1 (depends on model or mode):

• D-Link (select access point models)
• Some generic Chinese-brand travel routers and wireless adapters

Major US ISPs and their typical default admin IPs — none of them use 192.168.29.1:

If your router is a standard Asus home router and it’s showing 192.168.1.1 as its default gateway, use that address instead. The 192.168.29.1 address specifically surfaces in Asus access point mode, hotspot mode, or on Xiaomi hardware.

FAQ