192.168.62.1 – Router Admin Login Page

What Is 192.168.62.1?

192.168.62.1 is a private IP address — specifically, it’s the default gateway address used by certain routers and network equipment to serve up their admin control panel. When you type it into a browser on your local network, you’re talking directly to your router, not the internet.

Here’s the thing most people don’t know: this address only works while you’re connected to the same network as your router. It’s not a public website. You can’t access it from a coffee shop or from your phone’s cellular connection. That’s actually by design — it’s part of the private address ranges defined in RFC 1918 private address ranges, which reserve certain blocks of IPs (including all of 192.168.x.x) for internal, local-network use only.

Because 192.168.62.1 can’t be reached from outside your network, it’s reasonably secure. Nobody on the internet can just stumble into your router settings. That said, anyone on your local Wi-Fi network can reach it — which is exactly why you should have a strong admin password.

Default Login Credentials for 192.168.62.1

Before you log in, you’ll need a username and password. Most routers come with factory defaults printed on a label on the bottom or back of the device — and that label is always the most reliable source. The table below lists common defaults by brand, but please check your physical router label first.

Brand	Default Username	Default Password
Cayman	admin	admin
TP-Link	admin	admin
Asus	admin	admin
Linksys	admin	admin
D-Link	admin	(blank)
Netgear	admin	password
Cisco	admin	cisco
Tenda	admin	admin
Belkin	admin	(blank)
Custom/OEM Routers	admin	1234 or admin

How to Log In to 192.168.62.1 on a PC or Laptop

This works on Windows, Mac, or Linux. The browser doesn’t matter — Chrome, Firefox, Edge, Safari all work fine.

1. Make sure you’re connected to the router — either via an Ethernet cable or Wi-Fi.
2. Open your web browser.
3. Click in the address bar — this is the long bar at the very top of the browser, not the Google search box. This distinction matters more than you’d think.
4. Type http://192.168.62.1 and press Enter. If that doesn’t load, try https://192.168.62.1.
5. A login page should appear. Enter your username and password.
6. Click Login or OK.

If the page loads but the login fails, double-check the credentials against your router’s label. If you’ve forgotten a custom password, the only real fix is a factory reset (covered below).

How to Log In to 192.168.62.1 on a Phone

Competitors almost never cover mobile login steps separately — they just say “open a browser.” But logging in on a phone is a little different depending on whether you’re on iPhone or Android, so here’s how to do it properly.

iPhone (iOS)

1. Go to Settings > Wi-Fi and confirm you’re connected to your home network (not cellular).
2. Open Safari (or Chrome — both work).
3. Tap the address/search bar at the top.
4. Type 192.168.62.1 and tap Go.
5. The router login page should appear. Enter your credentials.

Android

1. Pull down your notification shade and make sure Wi-Fi is on and connected to your network.
2. Open Chrome or your default browser.
3. Tap the address bar at the top.
4. Type 192.168.62.1 and tap the Go/Enter key.
5. Log in with your credentials.

Troubleshooting: 5 Problems People Actually Run Into

How to Factory Reset a Router Using 192.168.62.1

Sometimes there’s no way around it — you’ve forgotten the admin password and you just need a clean slate. Here’s how to do it safely.

Before you reset: If you’re on a custom ISP setup (like a business connection with static IPs or special DNS), take a photo of your current settings or write them down before resetting. Resetting wipes everything — Wi-Fi name, Wi-Fi password, admin credentials, port forwarding rules, all of it.

To reset:

1. Find the Reset button on the back or bottom of your router. It’s usually a tiny pinhole button, not a big obvious button.
2. With the router powered on, use a straightened paperclip, SIM tool, or toothpick to press and hold the reset button.
3. Hold it for 10 seconds (some Cisco and Tenda models need up to 15–30 seconds — check your manual).
4. The router’s lights will flash or go dark, then restart.
5. Wait 60–90 seconds for the router to fully boot up.
6. Log in using the factory default credentials printed on the label.

After the reset, your router’s admin IP will return to its factory default — which may or may not still be 192.168.62.1. Check the label to confirm.

What to Do After You Log In

Getting into the admin panel is only step one. Here’s what you should actually do once you’re in.

1. Change the Admin Password

This is the most important thing you can do. Leaving the default “admin/admin” credentials in place is a real security risk — anyone on your network can change your settings.

1. Look for a section called Administration, System, Management, or Security in the left sidebar or top menu (varies by brand).
2. Find Admin Password or Router Password.
3. Enter your current password, then type a new one.
4. Click Save or Apply.

Make it something strong — follow NIST password guidelines, which recommend long, memorable passphrases over complex short passwords. Something like BlueSky$RoofTile99 is much better than P@ss1.

2. Change Your Wi-Fi Password

Go to Wireless or Wi-Fi Settings → find Security or Password → update the WPA2 key → save. Make sure all your devices reconnect with the new password.

3. Set Your Security Mode to WPA2 or WPA3

If your router is still running WEP or WPA (without the “2”), it’s using an outdated security protocol that can be cracked easily. In the same Wireless settings section, look for Security Mode and select WPA2-PSK (AES) at minimum. If your router supports it, choose WPA3 — here’s a comparison of WPA2 vs WPA3 if you want to understand the difference.

4. Check Connected Devices

Most admin panels have a Device List, DHCP Clients, or Connected Devices page. This shows every device currently on your network. If you see devices you don’t recognize, change your Wi-Fi password immediately.

5. Set Up a Guest Network

If friends and family come over and use your Wi-Fi, set up a guest network. This keeps them (and their devices) completely separate from your main network and your personal devices. Our guest network is named “GuestWiFi” — simple works. You can find detailed steps in this guide on how to set up a guest network.

6. Check Port Forwarding (If Needed)

Port forwarding is an advanced feature that lets external traffic reach a specific device inside your network — useful for gaming, home servers, NAS devices, and remote access setups. If you don’t need it, leave it alone. If you do, look under Advanced → Port Forwarding or Virtual Servers.

7. Update the Firmware

Router manufacturers release firmware updates to patch security holes and improve performance. Go to Administration → Firmware Update or Software Update. Some routers check automatically; others require you to visit the manufacturer’s support site to download the file manually. Here’s a guide on how to update router firmware if you need it.

Which Brands and ISPs Use 192.168.62.1?

This is a less common default gateway than 192.168.1.1 or 192.168.0.1, so it shows up in more specific situations.

Brands that commonly use 192.168.62.1:

• Cayman routers and DSL gateways
• Some custom OEM and white-label router hardware
• Certain industrial and enterprise-grade network devices

So if you’re a home user on one of the big US ISPs and you’re seeing 192.168.62.1 as your gateway, it’s likely because someone (or your ISP’s tech) manually configured the router to use this subnet, or you’re using a specialized piece of network hardware.

Frequently Asked Questions